Mastercam 2018 viewsheets free download.mastercam 2018 for solidworks

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Click the download button above to download Mplmaster for This is a free download for those who have already purchased the Mastercam X6 Port. ReadMe Mastercam /05/ MASTERCAM /05/ API The Paradigm Add-In does not capture plane gnomon with Viewsheets. CNC Software, Inc. – All rights reserved. Use of this document is subject to the Mastercam End User License Exercise 5: Using Viewsheets.
 
 

Mastercam 2018 viewsheets free download

Click an individual face of the solid to deselect it from the body. Pressing [Esc] or double-clicking in an open area of the graphics window accepts the selection. Selection masking for sheet bodies A new sheet solid selection capability has been added to the Select All and Select Only dialog boxes. Select Level or Viewsheet on the Capture Images dialog box to include them into your report.

Click an icon to launch the website. System Configuration Listed below are enhancements made to System Configuration. Default file open type You can set a default file type to be used when opening a file. The setting persists from session to session. Update to Parasolids This upgrade allows Mastercam to do the following: l Maintain compatibility with other CAD modelers l Benefit from new features and capabilities, when possible l Benefit from bug fixes within the kernel 52 What\’s New in Mastercam — General Enhancements User Interface Changes The following functions have been converted to function panels for Mastercam After selecting an update option, the right side of the dialog box shows which planes will be updated.

You can select different update options and see which operations will be affected before committing the change. You can no longer output as text. These include improvements to Solid, Model Prep, and Wireframe functions. Angle Sweep To improve the creation of more complex wireframe functions and when creating or editing primitives, there are now on-screen sweep and rotate controls.

These controls can snap to the AutoCursor positions of existing entities, including tangencies. Additionally, the controls recognize horizontal and vertical snap positions based on the gnomon orientation. All wireframe functions, with the exception of Polar arcs and Ellipses, now include a sweep control. Rotate controls were added to the following wireframe functions: Polygon, Ellipse, and Rectangular Shapes.

This also applies to Roll, located on the Transform tab. Helix and Spiral now include a single-axis control that lets you graphically modify the height of the shape you are creating and editing. Seam Control To make Roll and Unroll results easier to predict, a new gnomon based rotation control is now available.

You can visually rotate the seam to see how geometry will respond, as well as snap to AutoCursor positions. Align Note allows you to move existing notes and labels in such a way that they are more organized and easier to read.

After selecting the function, select the notes you wish to align, and then choose a note to use as the reference position. You can then make any adjustments needed from the function panel. Cross Hatch is also live, allowing you to see what you are creating before accepting it. Unlike notes, labels, and letters, leaders are not live entities and cannot be edited.

Methods used to align dimension orientations Auto, Horizontal, etc. When you select Lock, the specific Method you have selected stays active until you change it. You can easily create multiple dimensions using a specific orientation without having to reset it. Hole Axis Hole Axis is now easier to use with a large number of holes, especially holes with matching diameters that are selected as a group.

When you hold down the [Ctrl] key to select all holes with the same diameter, Mastercam calculates the top based on the direction of the hole. The result can be undesirable with multiple holes pointing in different directions. In previous releases, you had to individually select the axis inside the hole or select and then re-select each arrow to change the direction of the vector.

In , the vector arrow is larger and is selectable to make it easier to manage directions on a small set of holes. Direction options The new Direction options allows you to change the direction of the holes.

Use Opposite to flip the holes opposite of the direction determined by the Orientation option. Select Include blind holes to flip the direction of theoretical blind holes, but not true blind holes. A true blind hole has a physical bottom inside of the solid. A theoretical blind hole passes completely through a section of the solid.

Orientation options Use the new Orientation options to determine the direction of the top of the holes. Select Cplane to orient the top of the selected holes to match the positive direction of the Z axis of the current Cplane.

Now, you can undo and redo up to twenty-five Model Prep functions using the new Undo and Redo, located on the Solids Manager. They only affect changes made using the Model Prep functions. Applying a history-based Solid function to the model clears the Undo and Redo memory stream and makes any previous Model Prep changes permanent. Solid Enhancements Solid Sweep Solid Sweep now has more options and controls than in previous releases.

Solid Sweep operations from previous releases will still have limited features when edited in Mastercam Only newly created Solid Sweep operations will support the new options. Each profile must have an equal number of entities, but the profiles do not need to be chained in sync. The chains must contain the same number of entities, even if the shape is different.

Guide Chain Use a Guide Chain to influence a Solid Sweep operation by introducing a chain that alters the shape of the results. The images below depict the orange wireframe being swept across the blue wireframe.

The green wireframe is the Guide Chain. Guide Chains are not limited to the same plane as the Along Chain. New alignment options Two new options have been added to control the alignment between your profile and the Along chains. Previous releases always kept the same angle relationship between the Profile and Along curves.

You can choose one of the following: Normal l l Parallel Normal maintains the original angle relationship between the profile and along chain. Parallel keeps the cross sections parallel to the original profile.

The ability to control this relationship makes the exact placement of the profile in relation to the Along curve less critical. In Mastercam , the profile geometry easily runs along sharp corners. If any sharp corners are encountered, Mastercam miters them. This enhancement gives you greater flexibility and precision when modeling.

You can control the angle of the twist as well as its placement along the sweep. There is no limitation on the angle of the twist, and you can use the following options to apply the twist from a certain place: No twist Twist l The start of the Along Chain to the end l The start of the Profile Chain s to the end of the Along Chain l The start of the Along Chain to the Profile Chain s 69 What\’s New in Mastercam — Design Enhancements Solids Manager New icon A new icon has been added to the Solids Manager that represents solid bodies with operations that have been rolled back and are dirty.

This is especially helpful when there are many solid bodies and the bodies are collapsed so the history is not displayed. Stop Operation placement There is now a simpler way to manipulate the Stop Operation inside the history of a solid. You can now place the Stop Operation by selecting the operation you want to be last and selecting Move Stop Op here from the rightclick menu. Keep solid feature color Mastercam now retains a solid\’s face and feature colors even after you have removed its history.

Solid face masking You can now use the standard color masking tools found in the Quick Mask color selection to select solid faces when creating a surface from a solid. Transform Enhancements Listed below are enhancements made to the Transform functions. Control start position Rotate and Mirror now include a new option, Translate, which maintains the same start position of a closed circle when rotated or mirrored.

If deselected, the start position of the circle moves as it did in previous Mastercam releases. Select Metric or English in the Uniform group to scale your geometry. Wireframe Enhancements Listed below are enhancements made to Wireframe functions. These new features will help in the creation of more accurate containment boundaries. Ignore shared edges off Ignored shared edges on Only outside loops Curve All Edges now allows you to create curves from only exterior edges of a solid and ignores the inner edges when you select Only outside loops.

It is only active when solid faces are selected. Previously, these functions only supported creating geometry in 3D mode. By supporting 2D geometry creation, geometry created from the selected edge can be projected to the current Cplane and Z depth, instead of requiring you to use another function, such as Project.

Create Letters is now in a function panel, allowing you to work simultaneously within the graphics window.

This also means that the letters are now live entities, so when you choose a new font, reposition, or edit the text it now shows the results in the graphics window.

Use Edit Spline to refine and prepare splines. You can move, rotate, or lengthen the tangent vector or move the control point. For more control and a finer adjustment of the curve, you can add or remove node points, or increase the number of control points. Helix and Spiral Helix and Spiral function panels now include locks for specific fields. The fields you can lock are Revolutions, Height, Pitch for helix creation, and Initial Vertical Pitch for spiral creation.

Locking a field does not prevent you from changing that value, it simply establishes which field is constant and which two are calculated. Select this option to create a line by selecting two points. The first point selected will be the midpoint and the second point will define one end while the other end of the line is a mirror in the opposite distance and angle.

Modify at Intersection allows you to trim, break, or create points with lines, arcs, and splines where they intersect with surfaces, solid bodies, solid faces, and solid sheet bodies.

This is particularly useful when modeling or prepping for Multiaxis toolpaths. Select Modify at Intersection, and then use any selection method to select the wireframe geometry that you want to edit. After selecting the wireframe, select an intersecting surface, face, or solid body to display the function panel. When trimming geometry, Mastercam keeps the wireframe on the Normal side of the surface or solid by default. To change this, click Reselect.

Improved Inch and Metric Support Mastercam now supports mixing inch and metric tools and holders when building tool assemblies in Mill. You can use metric tools in inch part files and inch tools in metric part files. This includes proper tool compensation and scaling in Backplot and Verify.

Note: This does not support scaling operation parameters when changing system units. This launches another dialog box to allow you to select the tools you wish to import. The cloud icon in the second column indicates that the associated tool assembly has not been validated. If the tool assembly passes Mastercam\’s validation tests, you will see a green checkmark indicating that it can now be saved. If Mastercam detects problems with the tool, an icon will display indicating the severity of the problem.

A red X indicates that there is a critical issue that must be resolved first. A yellow exclamation mark indicates a non-critical warning. Use the hyperlink in the description field to review or edit the tool in question. The importer does not connect to a server process; instead, you import ZIP files containing your tool assemblies using the Open button.

Similar to importing with CoroPlus see \”Importing with CoroPlus\” on page 80 , all assemblies must be validated before they can be used in Mastercam. This includes improvements to the 2D, 3D, and Multiaxis suite of toolpaths. General Enhancements Listed below are enhancements that apply to Mill toolpaths in general, not just 2D or 3D toolpaths.

Drill point sorting Sort by name has been added to the Drill Point Manager right-click menu. This allows you to reset the sort order to the original selection order or in the order you have named the drill points.

When the cutter moves through outside arcs, the perimeter of the cutter is moving through the material slower than the center of the tool, which results in a decreased chipload on the tool. Contour The following enhancements apply to the standard 2D Contour toolpath. Chamfer tool offset In previous versions, you could only modify the Tip offset when chamfer milling, allowing you to control how far past the bottom chamfer rail the tip of the chamfer tool extends.

Top offset places the full diameter of the chamfer tool at a specified distance above the top rail of the chamfer. Bottom offset amount ensures the tip of the tool clears the bottom of the chamfer. Width has also been renamed to Chamfer width. You can also now enter 0.

This allows you to chain the top or bottom rail of an existing chamfer and place the chamfer where you desire using the top or bottom offset value. Multi pass order In Mastercam , multi passes were only ordered By contour, meaning it completed one chain before moving on to the next.

In , you can now choose By contour or By pass on the Multi Passes page. By pass orders the multi passes by pass number. It will run the first multi pass on all contours, then the second multi pass on all contours, and so on. Rough pass cut direction You can now control the cut direction of rough passes on the Multi Passes page.

Select either One way or Zigzag. One way causes the rough multi 87 What\’s New in Mastercam — Mill Enhancements passes to behave as they did in past versions. Zigzag will alternate the cut direction between climb and conventional. Both options respect the Keep tool down option. These options allow you to order your cuts from top to bottom or from bottom to top. By contour and By region machine each machining region to completion before moving to the next.

In previous versions, you could only machine finish passes at all depths or at the final depth. Now you can add or remove finish cuts, based on the number of rough depth cuts specified on the Depth Cuts page. Add between creates a finish pass at all depth cuts and adds a specified amount of passes between depth cuts.

For example, when set to 2, Mastercam adds two evenly spaced passes between depth cuts. In the image 89 What\’s New in Mastercam — Mill Enhancements below, the red lines represent depth cuts and the blue lines represent multipass finish passes. Per number of adds a finish pass only at every specified depth cut. A multipass finish pass is always added to the last depth cut. When set to 2, Mastercam adds a finish pass only at every second depth cut, depicted by the blue and red lines together below.

These new features are located on the Linking Parameters page. For example, if the top of a feature should be cleared by a certain amount, you can enter a Clearance amount, select Associative, and then pick a point on the feature in the graphics window.

The Clearance plane will always be the specified incremental value above the point, even if the feature is moved. Set the Entry method to Plunge only on the Entry Motion page. This option allows you to plunge directly into material. Spring passes create additional finish passes along the same path as the last finish pass.

In other words, use this option to create additional finish passes with a spacing of zero between the passes. This can used for parts with thin material that may have flexed away from the tool during previous passes. The tool motion can now use the top, bottom, or both values of the stock. All of the linking parameters can be set to adapt to changing stock values.

Undercut support Select Undercut undercut tool only when using an undercut tool to support tool compensation. When a slot mill tool, with Undercut undercut tool only and Step up selected, there are the following changes: l l Stock to leave becomes inverted. Break through becomes inverted. Select Tapered walls on the Depth Cuts page to angle depth cuts from the top of the stock to the final depth.

Disable undercut tool support When you select an undercut tool, but do not want to machine the undercut area, select Detect undercuts on the Rough Parameters tab for Surface Rough Pocket and on the Finish contour parameters tab for Surface Finish Contour.

Detect undercuts disables undercutting when using an undercut tool. This option is only available when Contact is set to Tool assembly contact. Follow containment allows the tool to follow the containment boundary back to the start of the cut, creating clean closed passes.

This also helps to avoid partial cuts when a containment boundary was directly on top of a vertical surface. High speed workflow The workflow for all 3D High Speed toolpaths has been streamlined. You can now define which part geometry to machine and which geometry to avoid. For each geometry group you create, you can also assign variable stock to leave values on its walls and floors.

Use the Model Geometry page to create different types of geometry groups and define their attributes, such as color and the amount of stock to leave. All of the geometry selection options that were previously located on the Toolpath Type page have been removed and relocated to the Model Geometry page or the Toolpath Control page.

The Toolpath Control page also includes options that were previously located on the Tool Containment page, which has been removed. On this page, you 97 What\’s New in Mastercam — Mill Enhancements can further refine your toolpath by setting an Approximate start point, the Strategy, and other options. This method does not change the construction plane. You can also rotate the part about one of the axis if you hold down X, Y or Z key and use the mouse wheel to rotate the part.

Function Key s Function Key s. The Appearance area allows you to choose different shading display options. Applying shading to surfaces and solids in the graphics window helps you visualize 3D geometry while you work. Use this area to set other shading parameters such as hidden edges, material appearance, translucency, lighting mode and other properties.

It also allows you to access the Muti-Threading Manager and if you purchased Art, the Art Manager can be activated here too. Figure 14 shows the commands used to create wireframe geometry. The commands are arranged in groups based on entity types or specific activity. The groups are displayed in the ribbon from basic to more complex functions.

Figure During geometry creation, AutoCursor automatically finds and locks snaps to geometry features. For example, as the cursor approaches the endpoint of an existing line, the cursor jumps and locks onto it. The AutoCursor is located in the General Selection bar. Figure 15 shows what options Mastercam has to preselect geometric features using the AutoCursor. To enter the coordinates of a point you can press Space bar or simply start to type the X, Y, Z coordinate values. The values are separated by commas and should be entered in this order; first the X value, then a comma, then the Y value followed by a comma and then the Z value.

Press Enter to finish the point. If you enter the specific label X, Y or Z in front of the value, you do not need to enter the coordinates in the specified order. Figure 16 shows examples of how to enter the coordinate values. As you work, Mastercam keeps track of your actions. If you make a mistake, click on the Undo icon left arrow to.

Continue clicking on the Undo button to undo the next previous action. Redo right arrow function reverses Undo actions or press Ctrl Y. The Undo and Redo icons are located in the. As in the previous versions of Mastercam, right click in any data field in Mastercam to retrieve numeric data from existing geometry. Figure 17 shows a right click with the cursor in the angle field on the Line Endpoints panel.

This opens a drop-down menu. Select the geometry feature to query, and then follow the function prompts. Since Mastercam , the Line Normal command allows you to create a line perpendicular to a surface or a solid face. You can also create points where the line contacts the surface or at the endpoint of the line. This command was under the Create Point Dynamic in previous versions.

In the Line Normal panel you should enter the Length. You will be prompted to select the surface or the solid face and then to select the locations to create the normal lines. Term Definition Line Normal Panel identifier.

Entity Contact point creates points at the contact point between the line and the surface. End point creates points at the other endpoint of the normal line. Without any of the entities selected, Mastercam will create just the normal line. Reselect Allows you to select another location for the normal line. Length Sets the line normal length. Direction Normal creates the line on the surface or surface solid in the same direction as the surface normal.

Reverse Normal will reverse the normal line direction. Both creates the normal line in both directions. OK and Create New Creates the line but keeps panel open allowing you to continue in the Operation same command. The Line panels control values and relations of lines. Line parameters can be changed until the OK and Create New operation or OK buttons are selected to complete its creation.

Until then, the entity is said to be \”live\” and is a cyan color. When fully defined, the line changes to the default drawing color. The Line Endpoint panel is shown in Figure Term Definition Line Endpoint Panel identifier. Type Freeform allows you to draw the line at any desired angle. Tangent specifies a line to be tangent to arc or spline. When this option is active, the line will be tangent to the arc if no other geometric feature, such as an endpoint or quadrant, is selected.

Horizontal draws a horizontal line. Vertical draws a vertical line. X axis offset-value of a vertical line, Y axis offset-value of a horizontal line. Term Definition Method Two endpoints allows you to create one line at the time entering the two endpoints. Midpoint Multi-line creates a string of lines. Endpoint 1 Changes the value of the start point. Endpoint 2 Changes the value of the end point. Axis Offset Moves a live line by a defined distance along X and Y axis.

You should be able to create lines using any of these options by simply following the function prompts. If you have problems, use the online help [Alt-H]. The Arc panels controls values and relations of arc entities as they are being created. The arc panel changes depending on the type of arc selected. Circle center point command is the most common selection.

It uses the following panel as shown in Figure Method Manual allows you to create full circles from a center point. Tangent allows you to create circles tangent to existing entity given a center point Center Point Reselect Edits the center point while arc is live. Radius Radius input. Press space bar and enter R to jump to this field. Click on the locker icon to lock the value. Diameter Input diameter. Press space bar and enter D to jump to this field.

OK and Create New Operation Creates the circle but keeps the panel open to continue to create another circle. OK Completes the circle and exits the command.

Follow the steps below to create a circle with center point at X1,Y1 and diameter of 0. If creating several arcs with the. Press the Enter key. A Cyan colored circle is displayed, indicating the circle is a \”live\” entity.

Altering parameters on the ribbon bar can still change live entities. You should be able to create arcs using any of these options by simply following the function prompts.

A Fillet is an arc between two entities. Follow the steps below to create a Relief fillet between two lines. The Chamfer Entities panel works similar to Fillet and provides several ways to define the chamfer. Select the chamfer Method and fill in any open fields. Function prompts will pop up in the graphic area to help you select entities to create the chamfer. Mastercam displays points using one of eight point styles.

To set the point style, right mouse click in the graphics window to open the Mini Toolbar. Click on the arrow to the right side of the Point Style in the Mini Toolbar and select the desired style as shown. The Point Dynamic command which creates a point along an entity by dragging the cursor along the entity and clicking. Item Definition Distance along Specifies the position of the point on the selected entity.

Enter a value in the Along field, and select an entity on which to place the point. Type Point allows you to create a point from existing geometry or by entering X, Y, Z coordinates. Thread Point allows you to create a thread point that specifies where a wire machine threads the wire. Cut Point allows you to create a cut point that specifies where a wire machine cuts the wire.

Reselect Allow editing of the point coordinates while the entity is still live. Depending on the point option selected, the following options may appear on other point ribbon bars. Follow the steps below to create a point given its X,Y coordinates. This places a point at the coordinates: X1, Y1. You should be able to create points using any of these options by simply following the function prompts. If you have problems, use Mastercam help Alt-H.

In Mastercam, entities are trimmed, broken or extended using the same Trim Break Extend function. The Break at Points command allows you to break lines, arcs and splines at points that lies on them. You have to have the points already created along the entities and to include them in the selection. Use window selection to include the points. In the Type area you can set the command to Trim or to Break entities. The rest of the options are define as shown. Mastercam has many wireframe geometry commands to make your job easier.

For example, the Rectangular shapes command creates rectangles, obrounds, and D-holes. You could create these objects using line and arc commands. However, the rectangle shapes command makes creating these shapes easier by defining them with settings and parameters. The command creates a rectangular or a cylindrical shape. This function is especially useful to determine the overall dimensions of a part.

Mastercam has extensive drafting capabilities. Unless you are doing tool design, you probably do not need to create detailed drawings. However, some basic dimensioning skills are useful for creating setup sheets, documenting your work for future reference, or communicating your ideas to others. In the Basic tab, you can choose the method in which you create the dimension between Auto, Horizontal and Vertical.

You can add the display for the arc symbols and modify the appearance of the witness lines. The leaders arrow direction can be set here as well as the editing the text, format and height. Implementing successful post processors for decades, the post department at In-House Solutions has earned a reputation for quality, resulting in one of the largest post departments in the world.

We have an extensive library that is continually developed and expanded to include current machines and controllers. If a post is not already available, we will develop a custom one for nearly any machine.

We have great relationships with OEMs who provide technical information for both machines and controls, which in turn allows us to produce post processors that will generate edit-free code and run your machine efficiently. Dynamic Used to manipulate geometry orientation and location through the use of an interactive gnomon. Rotate Rotates about Origin or point.

Translate Moves, copies or joins the geomery in X-Y coordinate system. Translate To Plane Translates between views, or planes. Project Projects entities to a depth, plane, or surface. Move to Origin Moves your geometry to the Origin. Mirror Flips about an axis, line, or two points.

Offset Entity Used to to move, copy, join, or slot a single entity parallel to the original, generating it a defined distance and perpendicular to the original entity. Offset Chain Used to move, copy, join or slot one or more chained entities, displacing them by a defined distance and direction and, optionally, a depth. Geometry Nesting Automatically transform and copy entities to fit within a specified space.

Rectangular Array Makes copies in a circular or linear pattern. Distribute Create multiple copies of geometry between two defined points and along a vector. Scale Makes a larger or smaller drawing. Stretch Moves entities and automatically update connected geometry.

A new option in the Scale, the Scale Calculator, allows you to calculate the scale factor based on existing geometry. You define the Base by entering or selecting an existing entity Line, Diameter, Radius or the distance between two points. Then in the Result you set the value that you wish the base to become. Introduced in Mastercam , Impression allows you to create a solid body from a closed chain and a negative impression of an existing solid as shown in Figure: Follow the steps below to create the Solid Impression.

Model Prep allows you to edit an existing solid by using options such as move faces or edges, move or copy existing features, split solid faces, modify or remove features or fillets, create hole axis, simplify and remove all history, and modify solid face color or set feature colors. Surfaces supported by Mastercam and where are they located in Mastercam are shown in the ribbon below.

You can start the Backplot and Verify simulations as well as the Machine Simulation. Note that you can still open Backplot and Verify from the Toolpaths Manager. Note that by default there are no toolpath functions displayed in the ribbons. As soon as you choose a machine, one or two new tabs known as contextual tabs will appear on the screen that will include all the related toolpaths. Lathe and Mill-Turn machines include multiple tabs.

For example the Lathe contextual tabs include Turning and Milling tabs as shown. To see all the toolpaths that are included in a group you can click on the Expand library arrow and the Toolpath gallery will appear as shown in Figure: Note that since Mastercam , the Toolpath gallery for the 3D toolpath group does not include some of the legacy toolpaths from the previous Mastercam toolpaths such as Shallow or Leftover. With the Levels Manager, you can set the active level, choose a level on which to create entities, select which levels are visible in the graphics window, and much more.

The Levels Manager panel will be placed to the left side of the graphics window and you can open it by clicking on the Levels tab as shown. Mastercam predefines the most commonly used Cplanes — those aligned with the coordinate system XYZ axes. These can be selected from the Planes Manager, or the Status Bar. The Planes Manager panel will be placed to the left side of the graphics window and you can open it by clicking on the Planes tab as shown. Create a new plane Allows you to select one of the options to defined a new plane.

From Geometry Defines a Cplane by selecting a flat entity, two lines, or three points. A flat entity is an arc, 2D spline, flat surface, or flat solid face. From Solid Face Selects a plane by picking on a flat solid geometry face. Dynamic Creates a plane through the use of an interactive gnomon in the graphics window. Select lathe plane Allows you to select one of the available planes used to draw and machine a lathe part.

Find a plane Allows you to find an existing plane previously defined. Display options Allows you to customize which planes are shown, and if the gnomon and plane info are displayed. Dynamic Plane uses an interactive gnomon to create a plane in the graphics window. The gnomon comprises three axes connected at the origin, with selection points on the gnomon\’s segments.

The Dynamic plane command can be triggered by clicking the Gview gnomon locate at the lower left corner of the graphics window. Any two lines that intersect can define a Cplane. Ideally, the lines intersect at a degree angle and share an endpoint. This is a preferred way to define Cplanes since it is easy to set the orientation, Origin, and axes directions based on how the entities are selected.

Pick the line near the new Cplane Origin. Use the arrows to toggle through the possible solutions until you see the one you want and then click on the green checkmark. Name the Cplane by entering it in the Name field. The Origin of the new plane is where the two lines intersect. Shift the Origin by clicking on the arrow below the Origin field and then picking a point on the part. Book a demo and see for yourself!

Open navigation menu. Close suggestions Search Search. User Settings. Skip carousel. Carousel Previous. Carousel Next. What is Scribd? Explore Ebooks. Bestsellers Editors\’ Picks All Ebooks. Explore Audiobooks. Bestsellers Editors\’ Picks All audiobooks. Explore Magazines. Editors\’ Picks All magazines. Explore Podcasts All podcasts.

Difficulty Beginner Intermediate Advanced. Explore Documents. Mastercam Interface Tutorial. Uploaded by gurdee. Document Information click to expand document information Description: interface. Did you find this document useful?

Is this content inappropriate? Report this Document. Description: interface. Flag for inappropriate content. Download now. Jump to Page. Search inside document.

Legend Conventions Key words and Mastercam menu items are shown in bold the first time they are used. Terms The following terms are used throughout this book. Figure: 1 To display the ribbons back, double click again in the tab area as shown in Figure: 2. Figure: 2 There are designated ribbon tabs to create or to manipulate the geometry using wireframe, surfaces or solids. By default, Quick Access Toolbar has the following functions, as shown in Figure: 4.

To hide all panels, click on the Auto Hide icon. Grid The Grid superimposes a pattern of dots and dashed lines on the drawing space.

The following Quick Mask buttons are available in Mastercam. The commands that are included in the Mini toolbar are shown in Figure: 5.

Click on the Toggle Attributes Panel icon to lock the toolbar as shown. The toolbar should look as shown.

Mastercam Interface Tutorial | PDF | Menu (Computing) | Graphical User Interfaces – What\’s New

Thank you for interesting in our services. We are a non-profit group that run this website to share documents. We need your help to maintenance this website.

Please help us to share our service with your friends. Share Embed Donate. Information might have changed or been added since this document was published. The latest version of the document is installed with Mastercam or can be obtained from your local Reseller.

A ReadMe file ReadMe. PDF — installed with each release — includes the latest information about Mastercam features and enhancements. Mastercam features new functionality focused on delivering speed and efficiency to your machining jobs. Product Changes Two changes have been made to the Mastercam 2018 viewsheets free download Entry product.

The 2D chamfer Contour type is now available for a 2D Contour toolpath. Technical Support—Our Technical Support department or [email protected] is open Monday through Friday from a. Visit our website, or select Help, Tutorials from Mastercam\’s File tab to see the latest publications.

Take advantage of more than videos to master skills at your own pace and help prepare for Mastercam Certification. For more information on Mastercam University, please contact your Authorized Mastercam Reseller, visit www. For tech tips and the latest Mastercam news, follow us on Facebook www. Visit our YouTube channel to see Mastercam in action www.

Registered users can search for information or ask questions on the Mastercam Web forum, forum. This includes improvements to selection, general toolpath enhancements, and other functions not specific to mastercam 2018 viewsheets free download product line. Analyze Enhancements Listed below are enhancements made to the Analyze functions, located on the Home tab.

Analyze Toolpath 5-axis vector information Mastercam 2018 viewsheets free download Toolpath now includes XYZ location data corresponding to the mouse location at the start green or end red of the toolpath segment. This information is in addition to the feed and speed data that is shown between the start and end of the segment. Use the Opacity slider to control their translucency.

Analyze Distance Along Curve allows you to mastercam 2018 viewsheets free download the distance along a line, arc, or spline edge without having to trim or break it first. Unlike Analyze Distance, Analyze Distance Along Curve does not measure a linear distance, but rather the length along the curve between two userdefined points. This function reports the following position coordinates as they relate to the Cplane origin: l Distance l Start angle 15 What\’s New in Mastercam — General Enhancements l End angle l Sweep angles Lathe coordinates Analyze Position now displays when a DZ construction plane is now active.

Propagate arc radius When using Analyze Entity on an arc or radius, you can now apply a diameter to all selected arcs by selecting Propagate arc radius on the dialog box. Statistics Statistics now reports the number of sheet solids in the current part file.

Now, Face center points and Center points are independent of each other. The Command Finder opens as a floating window that can be repositioned and remains on-screen until you close mastercam 2018 viewsheets free download. Enter a word in the Command Finder and Mastercam returns a list of possible matches that include a short description of 10 pro product key valid download function. Double-click a search result to open that function.

In Mastercamyou can also create new viewsheets by clicking New mastercam 2018 viewsheets free download the right of the viewsheet tabs. The new tab is highlighted, so that you can страница the name immediately after creating the viewsheet. By default, the new plane is added to the Planes Manager. Delete Duplicates Delete Duplicates windows server r2 trial free download identifies duplicate arcs, even when they have different start and end angles.

No Hidden Dimmed 20 What\’s New in Mastercam — General Enhancements Endpoints Endpoint display has been enhanced, now displaying as solid white circles with a black outline to provide contrast with different geometry and background colors. You can toggle Endpoints on the Home tab to display or hide geometry endpoints. Your setting will persist across multiple sessions of Mastercam. The size of the endpoints is not configurable, and they do not scale mastercam 2018 viewsheets free download the screen is re-sized.

Improved access to chaining tolerance Chaining tolerance is now stored with the chains in the Chain Manager. The value in the Chain Manager only affects the selected toolpath and is applied to all subsequent regenerations of the operation.

Other toolpaths will continue to default to the chaining tolerance set in the Tolerances page of System Configuration. As with other operations in Mastercam, when http://replace.me/26029.txt move or modify the geometry used in the Probe operation and regenerate, the operation will update with the new geometry.

You no longer need to recreate the Probe operation. Stock display The Stock Display and Stock Shading options, that were previously available on the View tab in Mastercam mastercam 2018 viewsheets free download, are now located on the specific machine type tab and have been expanded.

In the case mastercam 2018 viewsheets free download Mill, Router, and Wire machine types, Stock Display works as it did in previous versions. For Lathe and Mill-Turn machines, you can now control which stock components are displayed in the graphics window.

For Mill-Turn machines, the available components depend on your Job Setup and your current machine. If a component is not defined or available for your current machine setup, the option is disabled from the Stock Display drop-down. Guided Chaining You can now guide and select the next entity in a chain when a branch point has been reached.

Guided chaining is available in 3D Wireframe and Linked Edges mode for solids. One or more blue arrows display pointing in the direction of any alternate branches as shown in the following example. Two new controls are now available on the Chaining dialog box: Use Next to continue in the direction of the red arrow.

Alternately, you can click on the red or blue mastercam 2018 viewsheets free download to advance the chain in that direction. Keep names when exporting solid bodies When exporting solids to other CAD formats, Mastercam will now export the solid name data with the bodies. Naming levels and solid bodies from imported solid assemblies When importing solid assemblies, Mastercam\’s file importers use a new protocol to populate both the Solids and Levels Manager.

Mastercam processes the solid depending on what type of information is available from the incoming file format. If there is no level or body name data in the imported file, the body and the level name are the file name.

Levels Manager l l l l Level names from the imported file or assembly are preserved in the Mastercam part file. Even when importing from formats with no level data, Mastercam places the imported solid bodies on separate levels.

The level name is based on the solid body name, when possible. When the information is present in the original file, Mastercam 26 What\’s New in Mastercam — General Enhancements assigns the solid body name to each level. To change this behavior, deselect Assign Level names to match Solid names on the Converters page of System Configuration. Mastercam organizes the various solid bodies of an assembly in the Solids Manager.

Whenever possible, Mastercam names each imported solid body. Multiple bodies with the same name will have numbers appended. Bodies in separate part files in assemblies will include the name of the assembly in the Solids Manager. Ignore blanked entities in count Select Ignore blanked подробнее на этой странице in count from the Display options dropdown to not include blanked entities in the Entities column count.

This option is off by default. Previously, blanked entities were included in the entity count and caused confusion between the count and visible entities on a level. Import via drag and drop You can now drag and drop a supported file for example.

Mastercam Simulator Listed below are enhancements made to Mastercam Simulator, accessed through the Toolpaths Manager. You can add a bookmark, clear a bookmark, or clear all bookmarks. Use Automatic Bookmark to insert bookmarks at certain locations, such as a tool mastercam 2018 viewsheets free download or operation change. The bookmarks are then displayed on the playback bar. Simply select any bookmark icon to display the part as it is at that moment.

You can also use Create Bookmark on the playback bar to add a bookmark. If you exit Mastercam Simulator or regenerate the toolpaths, the bookmarks are cleared automatically. They do not persist between sessions. Create presentation You can now create a presentation from Mastercam Simulator.

Saving a presentation lets you preserve your settings and layout of your Mastercam 30 What\’s New in Mastercam — General Enhancements Simulator session and can be used to show a simulation on any computer, even if it does not have Mastercam. Select Save Presentation on the Home tab to create your presentation. Select Verify from the Toolpaths Manager, and select Simulation on the Home tab to view the machine simulation. Use the Components tab to set up stock and fixtures. Use the Data tab to set tolerances.

Use mastercam 2018 viewsheets free download Simulation tab to mastercam 2018 viewsheets free download the machine, position, and tolerance. If you do not have a machine selected when entering Mastercam Simulator, Mastercam will default to a generic machine or a machine http://replace.me/14582.txt was selected in the Machine Simulation dialog box for the standalone Machine Simulation.

Once logged in, you have access to Mastercam\’s social media outlets, your Reseller information, the Mastercam forum, and other helpful information. Alternately, you can select a member of the group, which will select the entire group. This new option is located on the Nesting Configuration dialog box.

New location for temporary files Temporary nesting files now go into Mastercam\’s default temp folder When creating a new plane by using windows 10 cambiar idioma del sistema operativo free download on-screen, dynamic gnomon, from the Planes Mastercam 2018 viewsheets free download, using Trim to Plane, etc. When editing an existing plane, the Edit Plane function panel opens.

The function panels share the same controls, which are enabled or disabled as appropriate for the current mode. Import via drag and drop You can now drag and drop a supported file onto the Planes Manager to import the file\’s planes.

The Plane Selection dialog box displays and lets you select which planes to import. The planes are imported into the open Mastercam file.