Microsoft Office encountered an error during setup

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
T xyz\’s post on September 26,
 
 

Microsoft office standard 2013 has encountered an error during setup free. Microsoft office standard 2013 encountered an error during setup

Sign In. System Center Blog. URL Copy. Options Author. Add author Searching. System Center Update Rollup 4. This update rollup includes critica Read on Announcement: System Center is here! System Center is now available!

Upgrade now to experience exciting new features A brand new web console for Orchestrator Molish on Dec 16 AM. We are excited to announce the release of brand new web console for System Center Orchestrator The new web console How do you keep a tab on System Center You must be eagerly looking for the next version of System Center.

System Center , the next release of our Long-Term SujayDesai on Oct 11 AM. With less than year left for System Center and System Center R2 products to go out of support, this is reminde We are excited to announce a new Management Pack to monitor Microsoft Workload. For more details, read on.. We are officially announcing support for Ubuntu Run the Click-to-Run installation as that new user.

The installation takes place in the following 5 different stages. The installation takes about 5 — 10 minutes , obviously depending on your internet connection. See also this official Microsoft support article about Office licensing on terminal services. The only way to solve this is by using computer-based designed for TS environments activation rather than user-based activations designed for single user environment.

See the process to solve this — and to make Office ProPlus licensing roaming possible — through one of the steps below. The first option is by using a configuration. The process works as follows:. Note : Make sure you assign each user a license for Office ProPlus and that users log on to the shared computer with their own user account. The Office Deployment Tool , combined with a simple text file, is used to install Office ProPlus on the shared computer, and to enable shared computer activation for that computer.

Add the following lines when you create the XML file. An example of a complete configuration. Perform the ODT installation , and include the configuration. Remember that a user is allowed to activate Office ProPlus on 5 other devices. Are you experiencing any troubles during the setup, please check this troubleshooting article to put you in the right direction. Single sign-on SSO recommended: SSO delivers a better user experience and reduces the number of times a user is prompted to sign in for activation.

With SSO configured, Office activates with the credentials the user uses to sign in to Windows if the user is also licensed for Office ProPlus — all automatically without user interaction! Without SSO activated, the user always needs to sign in to the first Office product they launch through the manual setup screen below.

When you switch to portal. Go to accounts , followed by Install status. Microsoft changed how they approach installing software on a Desktop and Server OS machine.

As an example, OneDrive and Teams are two applications that are completely installed in the users profile rather than in the all users profile Program Files. First we must create the following registry key in the image. Download Teams and run the command below to install Teams per-machine.

If everything ran perfectly you will see Teams showing up in the Program Files directory. When everything goes as expected. Please start Teams — go to the About settings of your Teams Client inside your session host. This support will couple the fast access to files that users love, with reduced User Profile Disk storage requirements and cost savings that businesses need. Learn more about how to take advantage of this new capability with Windows Server OneDrive Files On-Demand helps you access all your files in OneDrive without having to download all of them and use storage space on your Windows device.

See the exhibit below. Make sure to re-install the application by using the following command. Also, when running this on a Multi-User environment, this means that on that same session host, all the different user-profile — OneDrive versions will update simultaneously — which can get messy in terms of network throughput. This is also solved with the per-machine version.

The agent operation failed because the protection agent is not active until you restart the selected computers. On the Administrative Tools menu, select Services. In the right pane, right-click Remote Registry , and then select Start. Note You can disable the Remote Registry service after the agent operation is complete.

In the right pane, right-click Windows Installer , and then select Start. You can disable the Windows Installer service after the agent operation has completed. Installing a protection agent on a computer that is running Windows Server causes the computer to briefly lose network connectivity. If the computer is a domain controller, verify that the primary domain controller the PDC Emulator is running Windows Server with Service Pack 1 SP1 , and that Active Directory has completed replication between the domain controllers since the Windows Server SP1 installation.

In the Management task area, on the Agents tab, select Install in the Actions pane. Possible Issue 1 The account that is used does not have sufficient user rights and permissions on the server. Resolution: Retry the agent operation and provide credentials that have administrator user rights on the DPM server. Possible Issue 2 The system times of the DPM server, the server on which you are installing the agent, and the domain controller are not synchronized; therefore the Kerberos authentication fails.

Resolution: Verify that system times on the DPM server and the server on which you are installing the agent are synchronized with the system time on the domain controller. Resolution: Verify that the DNS settings are correct. To resolve this error, do the following: 1. Note You can disable the service after the protection agent operation is complete. To resolve this error, do the following: Make sure that the correct version of the agent is installed on the selected computer.

Review the error details, take the appropriate action, and then retry the agent installation operation. For more information, see Installing Protection Agents Manually. Resolve any errors that you receive during the installation of the hotfix. If you receive the error, The service cannot be started, either because it is disabled or because it has no enabled devices associated with it , do the following: In Service Manager , expand Configuration , and then select Services.

In the Services pane, right-click Windows Update , and then select Properties. Retry the agent installation operation. Review the error details, take the appropriate action, and then retry the agent operation. Resolution: Verify COM permissions on the server. Make sure that the disks being added to the storage pool do not contain any of the following: system volume, boot volume, OEM or other special volumes, DPM software, or SQL Server databases.

Check Disk Management to see whether the disk is online. If the disk is offline, check the hardware configuration and then rescan. The allocation of disk space for storage pool volumes failed because there is not enough unallocated disk space in the storage pool.

The details are available in the application event log. Do not use system tools to change the size of volumes on disks that are in the DPM storage pool. All protection and recovery jobs on ServerName will fail until the agent is re-enabled.

Do you want to install the protection agent? To resolve this error, follow these steps. Caution Serious problems can occur if you modify the registry incorrectly. These problems could require you to reinstall the operating system. Microsoft cannot guarantee that these problems can be solved.

Modify the registry at your own risk. Always make sure that you back up the registry before you modify it, and that you know how to restore the registry if a problem occurs. To protect clustered resources, you must install a DPM protection agent on all nodes of the cluster.

Review the error details, and make sure that the Windows Management Instrumentation service is running and can be accessed remotely from the DPM server. Make sure that the cluster state is correctly configured and verify that all nodes are joined to the domain.

You have selected basic disks. DPM will convert to dynamic disks and any existing volumes on these disks will be converted to simple volumes.

The missing disk contains protection group members. To continue protecting these members, you must allocate them to another disk. DPM could not set security permissions on the replica or recovery point volume that was created.

Make sure that you have specified a valid instance of SQL Server associated with DPM and that you are logged on as a user with administrator privileges. To remove the selected alerts, right-click the alerts, click Set Alert Resolution State , and then select Resolved.

This publishes all existing alerts that may require a user action to Operations Manager. You typed an incorrect user name, password, or SMTP server name. Type the correct user name or password to enable e-mail delivery of reports and alert notifications. Make sure that the appropriate permissions exist to send e-mail to the specified server by using SMTP. Changes to end-user recovery settings do not fully take effect for each protection group until the next successful synchronization is complete.

To install DPM, you must be logged on as an administrator or a member of the local administrators group.

Sign in to the computer as an administrator or member of the local administrators group, and then run Setup again. The computer processor speed does not meet the DPM minimum configuration requirements. Upgrade the computer hardware to meet the DPM minimum configuration requirements, or install DPM on a different computer. The available memory on the computer is less than the DPM minimum memory requirement. Troubleshoot your Windows Installer installation. Contact your support personnel for further help.

If either service is stopped, in the Details pane, right-click the service, and then select Start. If the services don\’t start, change the logon account for both services to the Local system account by doing the following: In the Details pane, right-click the service, and then select Properties. On the Log On tab, select Built-in account. In the Built-in account list, select Local system , and then select OK. In the Details pane, right-click the service, and then select Start.

On the Log On tab, select This account , in the Account name box, type. Right-click Windows Management Instrumentation , and then select Start. Reporting Server web server URL is not accessible. Verify that the DPM server meets the software requirements. Failure to create the service may be due to a pending restart.

Verify that the SQL Server service is running. DPM cannot enumerate the list of computers on which protection agents are installed because it cannot gain access to the DPM database. Protection agents may be installed on some of the computers. Enter a valid DPM product key.

DPM can only be installed on the local drive of the computer. You cannot install DPM on removable media or a network share. Delete the volumes allocated to DPM from the disks that were added to the storage pool. On the Administrative Tools menu, select Computer Management. The existing installation is a later version than the version you are trying to install. DPM Setup could not create a required service. This computer may be protected by another computer running DPM. You cannot install DPM on a computer on which a protection agent is installed.

Expand Local Users and Groups , and then select Groups. The job was canceled. The user either canceled the job or modified the associated protection group. The DPM service terminated unexpectedly during completion of the job. The termination may have been caused by a system restart.

In the Monitoring task area, group jobs by type and review the job details. If the next scheduled occurrence of this job is currently running, no action is required. If the job is not currently running, retry the job. Make sure that the protected data source is installed properly and that the VSS writer service is running.

Cannot connect to the DPM service because it is running in recovery mode, which was initiated by the DpmSync tool. Wait for DpmSync to complete its operation. Review the application event log for information about a possible service shutdown. Make sure that the DPM service is running, and review the Application event log for information about a possible service shutdown. Either the DPM Alerts event log has been deleted or the permissions have been changed.

If you are already connected to a DPM server and still seeing this error, make sure that the DPM service is running and review the application event log for any errors. Unable to connect to the database because of a fatal database error. It is unlikely that the database has been damaged. Contact your SQL Server administrator. Review the Windows event log.

It is possible that the problem is in the cache only and not on the disk itself. If so, restarting SQL Server corrects the problem.

Otherwise, use DBCC to repair the problem. In some cases, it may be necessary to restore the DPM database. If the problem persists, contact Microsoft Customer Service and Support. Make sure that SQL Server is running and that it is configured correctly, and then retry the operation. Check the logs for errors, resolve any errors that you find, and then try to open DPM Administrator Console again. Type the following SQL query, and then select Execute.

To resolve this error, do the following: To install agents on these computers, in the Management task area, select the Agents tab, and then, in the Action pane, select Install.

If any of the computers are a node of a cluster or a mirror, you must install a DPM protection agent on all physical nodes of that cluster or mirror. To install protection agents on these computers, in the Management task area, select the Agents tab, and then, in the Action pane, select Install.

If any of the computers are a node of a cluster, you must install a DPM protection agent on all physical nodes of the cluster. Perform a full restore of the virtual machine. If none of the conditions listed in the Explanation section are present, and you still get this error, try the workaround explained in Error when you manage a VHD file in Windows Server or Windows Server R2: \”A Virtual Disk Provider for the specified file was not found\”.

To resolve this error, do the following: Make sure that the front-end Web server of the SharePoint farm has been configured for protection by using ConfigureSharePoint. To reset, select Yes. To keep the current selection, select No. Click Yes to claim ownership of this data source and to resume backup and recovery of the data source.

This will be reported to Microsoft. A consistency check can be started automatically or manually. To configure automatic consistency check options, change this protection group by using the Modify Protection Group Wizard.

To start a manual consistency check, in the Protection task area, on the Actions pane, select Perform Consistency Check. All protection activities for this data source will fail until the replica is synchronized with consistency check. Some jobs have successfully recovered data and some jobs have failed. You have chosen to create the replica manually. All subsequent protection activities for this data source will fail until the replica is created and synchronized with consistency check.

Replica creation job is scheduled to run at a later time. Data protection will not start until replica creation is complete. All subsequent protection activities that use this disk will fail until the disk is brought back online. To resolve this error, do the following: Perform a fast inventory after each tape operation. Make sure that the tape specified for a detailed inventory is not in a drive and being backed up.

To reduce the number of detailed inventory failure alerts, create the following registry key. Note After you have created the registry key, you can check whether detailed inventory jobs fail or succeed by using the Jobs tab in the Monitoring view.

Refer to the detailed error code in the description above. Retry the operation after the issue has been fixed. If the error was caused by insufficient resources, it could be a transient failure, and you should retry the operation later.

If error is because of privileges with SMB share, wait for some time or reboot the file server, and then retry the operation. This could be because the file or folder is corrupt, or the file system on the volume is corrupt. Run chkdsk on the affected volume, and then run synchronization with consistency check. If running chkdsk doesn\’t solve the problem, and the computer indicated above is a protected computer and not the DPM server , consider deleting this file or folder from the source, and then running synchronization with consistency check.

If the volume exists, retry the operation. Some items were not recovered because recovering items across a reparse point is not permitted. DPM failed to run the operation because it could not retrieve the ownership information for the targeted computer.

This could be caused by cluster failover during backup or insufficient disk space on the volume. If cluster failover has happened during backup, retry the operation. Start the service on the computer on which the DPM database was created. Make sure that you are a member of the local Administrators group on the DPM server.

DPM could not set up a schedule for this report. The information is either missing or it is incorrectly specified. DPM cannot set up an e-mail subscription for this report.

The information may be missing or incorrect. There is not enough content to generate a report for this time period. DPM cannot perform this action because no valid property settings have been detected for this report. The system files may be corrupt. Retry the reporting task. In Configure Report Server , update the email settings.

In the Actions pane, select Options , and then, on the Reporting Password tab, enter a valid password. Expand Local Users and Groups , and then select Users.

Unable to configure local Windows account in the system. The operation is allowed only on the primary domain controller for the domain. DPM is unable to configure the Windows account because the password you entered does not meet the Group Policy requirements. You are unable to add the local computer to the intranet security zone in Internet Explorer because of insufficient permissions.

Do you want to add the site and view the report? However, you can proceed to the report by specifying your user name and password in subsequent steps. Install ASP. NET 2. DPM is unable to read the registry to retrieve report settings because of insufficient permissions. Connect to the computer on which the DPM database was created. Make sure that the Windows Management Instrumentation service is running. DPM reporting is not yet activated because the required security settings could not be applied to the DPMReport local account.

Right-click Allow log on locally policy, and then select Properties. In Reporting Services Configuration Manager , update the email settings.

DPM is unable to generate reports. This may be because the web. Make sure that the web. Rerun synchronization or wait for the next synchronization to occur. If the problem persists, check your domain configuration.

Either run a synchronization, or wait for the next scheduled synchronization to occur. On the Agents tab in the Management task area, make sure that the cluster nodes are accessible. Use the cluster administrative console to make sure that the cluster is still clustered. If you do not allocate more disk space, synchronization jobs may fail.

Allocate more disk space for the replica. If no free disk space is available in the storage pool, you may need to add physical disks to the computer running DPM. Make sure that the disk containing the replica volume and the recovery point volume appears in Disk Management.

If you are unable to locate the volumes in Disk Management, try following: In the Management task area in DPM Administrator Console, on the Disks tab, rescan the disk containing the replica volume and the recovery point volume, and then make sure that the volume is back online.

In the Protection task area in DPM Administrator Console, stop protection of the data source by using the Stop protection of member option, and then add the data source to a protection group again. Your recovery point is valid, but you cannot perform item-level recoveries by using this recovery point. If you don\’t expect to perform item-level recoveries by using this recovery point, dismiss this alert; otherwise, take the recommended actions: If the operation failed for a short-term backup to disk, in the Protection task area, select the data source, and then select Create recovery point to restart the backup.

If the operation failed for a short-term backup to tape, in the Protection task area, select all the failed data sources that belong to the same protection group, and then select Create recovery point – tape. This will make sure that the tape backups are located on the same tape.

Dismiss this alert immediately after starting your backup. To configure automatic consistency check options, modify this protection group using the Modify Protection Group Wizard. To start a manual consistency check, in the Protection task area, in the Actions pane, select Perform Consistency Check.

After the initial replica is created, only incremental changes are synchronized. All protection activities for data source will fail until the replica is synchronized with consistency check. You can recover data from existing recovery points, but new recovery points cannot be created until the replica is consistent. For SharePoint farm, recovery points will continue getting created with the databases that are consistent. To back up inconsistent databases, run a consistency check on the farm.

Some jobs successfully recovered data and some jobs failed. Make sure that the file is not already present and in use on the destination computer, and that there is sufficient disk space for the files. Most or all jobs failed to recover the requested data. Possible solutions – In the Monitoring task area, on the Jobs tab, select Type to group the jobs by type to view details of the recovery jobs.

Retry the action after you start the service. If you are recovering to Exchange server that is cluster continuous replication CCR or local continuous replication LCR , perform following steps: Reseed the replica of the recovered storage group. Resume the storage group copy for the recovered storage group. If the data source being protected is SharePoint, select Error Details to view the list of databases for which recovery point creation failed.

The last job failed for the following reason:. You can also retry the stop protection job. To resolve this error, do the following: Manually copy data to the replica path as specified in the details for this data source in the Protection task area. A replica creation job is scheduled to run at a later time. Data protection will not start until the replica creation is complete. In the Management task area, on the Disks tab, check the status of the disks. If a disk is missing, rescan the disk configuration to detect the disk.

If the disk is still missing, verify physical disk connections, and then scan the disk again. If the disk is no longer available, you can remove the disk from the storage pool. To continue protecting the affected data, stop protection of the data sources by using the Stop protection of member option, and then add the data sources to a protection group again.

In the Management task area, On the Agents tab, check the status of the agent and update it to the correct version. Subsequent protection activities for this computer may fail if the connection is not established. In the Management task area, on the Agents tab, check the status of the agent. DPM has discovered new unsupported files or folders on one or more protected volumes. DPM will continue to protect the supported data on these volumes, but will not protect the unsupported data.

Stop protection for this share. Reprotect the same share. Check to see that multipath software is running on the DPM server. In the Management task area, on the Disks tab, select Rescan. Attempts to fix this may not have been successful.

Older recovery points may not be recoverable because of hardware issues on the protected computer or DPM server. To resolve this error, do the following: Review the System event logs for hardware-related errors on the protected computers and the DPM servers.

Perform test recoveries of the last recovery point on the volume and the older recovery points that may have issues. Manually create new recovery points for the data sources that are indicated in the error. Run more frequent integrity checks. This is because of an IO error on a protected server with possible hardware issues. To resolve this error, do the following: Review the System Event log for any hardware-related errors on the protected computer.

Run hardware diagnostic tools to verify the health of the hardware. Run application-specific integrity checks to make sure of logical consistency of the data. In case of a failure, recover the data from latest recovery point, and then perform an application-specific integrity check.

Repeat this process with previous recovery points until you recover a logical consistent recovery point. Manually create new recovery points for the data source indicated in the error. Your recovery point is valid, but you will be unable to perform item-level recoveries using this recovery point. To resolve this error, do one or more of the following: If you don\’t expect to be performing item-level restores using this recovery point, then dismiss this alert; otherwise, take the following recommended actions: Install the Hyper-V role on the DPM server.

In the Protection task area, select the data source, and then select Create recovery point to restart the backup. Your recovery point is valid, but you will not be able to perform item-level recoveries by using this recovery point. If you don\’t expect to perform item-level recoveries by using this recovery point, dismiss this alert; otherwise, take the following recommended actions: Make sure that the Hyper-V WMI provider call succeeds on the Hyper-V host.

In the Protection task area, select the data source, and then click Create recovery point to restart the backup. If you don\’t expect to perform item-level recoveries by using this recovery point, dismiss this alert; otherwise, in the Protection task area, select the data source, and then select Create recovery point to restart the backup.

Some of the recovery points for these databases in the farm would be associated with an earlier successful catalog. If the data source is a SharePoint farm, a valid recovery point was created.

However, content databases from this recovery point can be recovered only by using the alternate location option. Your recovery point is valid, but you may not be able to perform item-level recoveries in an optimized manner using this recovery point.

You may choose to perform unoptimized item-level restores using this recovery point, then dismiss this alert; otherwise in the Protection task area, select the data source and select Create recovery point to restart the backup. DPM will automatically recreate this group but optimized item level recovery will fail for older recovery points. Perform unoptimized item level recovery for older recovery points.

This will take more time than it normally takes. Detailed steps to perform this are provided in the documentation. In the Monitoring task area, group jobs by type, and then review the job details.

If you retry a synchronization job and it fails again, consider enabling on-the-wire compression. Choose to send Microsoft anonymous feedback automatically about your hardware and software configurations, and feature usage patterns. Make sure that the disk containing the replica volume appears in Disk Management.

After the initial copy is made, only incremental changes are synchronized. In the Monitoring task area, on the Jobs tab, sort the jobs by type to view the details of the recovery jobs. In the Monitoring task area, on the Jobs tab, filter the jobs by type to view details of the recovery jobs.

To resolve this alert, you need to increase the free space in the DPMDB volume, or increase the alert threshold value in the tape catalog retention dialog. If the tape catalog is large, reducing the size of the tape catalog may make sure that DPM database does not grow any further. SharePoint You may see this warning if you are protecting a large SharePoint farm with millions of items in it.

Make sure that you have enough disk space on the DPM database volume for the database to grow. If you do not allocate more disk space, synchronization jobs may fail due to insufficient disk space. Allocate more disk space for the recovery point volume by using the Modify disk allocation action in the Protection task area.

If no free disk space is available in the storage pool, you may need to add physical disks to the computer that is running DPM. Data transferred and time elapsed must be an integer, and greater than or equal to zero, and less than the maximum number size.

Express full backup 2. Consistency check 3. If you are seeing this error, the following are a list of possible solutions: In the Monitoring task area, check the Alerts tab to locate the specific alert for one of the operations indicated above. Follow the recommended action for that alert. If you do not find any active alerts for the operations indicated above, click the link that appears below the alert window to inactivate this alert. Run consistency check and retry the operation again.

Resolve any active Agent ownership required alert for the computer. To rerun the failed job, click the link that appears below the alert window. To review the list of computers that DPM has not backed up, click View Error Details , and then take the appropriate action. To modify the number of days after which DPM should display an alert for client computers that are not being backed up, modify the protection group properties. Virtual machine recovery to alternate host is complete.

Verify the virtual machine configuration before starting it. You may need to reconfigure the network adapter for the virtual machine on the alternate host before starting it. Either stop protecting this data source from this DPM server or take over ownership of the data source for this DPM server. After taking ownership, click on the link below to rerun the failed job. DPM could not run the backup job for the data source because the number of currently running backup and recovery jobs on the Production server has reached its limits.

DPM could not run the recovery job for the data source because the number of currently running backup and recovery jobs on the Production server has reached its limits. The last online recovery point creation failed for the following reason:. The last online recovery point creation failed for the following reason: ID: Windows Azure Backup Agent was unable to create a snapshot of the selected volume.

ID: This can occur if the DPMWriter service isn\’t running. To resolve the issue, set the DPMWriter service to Automatic , and make sure that the service is started. Check the domain configuration to make sure that the DPM schema extension has been successfully applied to the Active Directory. Also verify that DPM has permissions to access the data in the extended schema. The system has not been modified.

To install this program at a later time, run the installation again. Your system has not been modified. Make sure that the domain name is properly constructed. The following example shows a properly constructed domain name: city. Active Directory Domain Services could not be configured because the DPM computer with the specified name could not be found.

Configuration failed because this computer is not in the given domain, the domain cannot be found, or the account used doesn\’t have Active Directory Domain Services update privileges. DPM was unable to configure Active Directory Domain Services for end-user recovery because a recent change to Active Directory Domain Services has not yet been replicated between domain controllers.

Make sure that the schema master replicates the latest changes to at least one domain controller, and then retry the operation. The number of drives reported for this library is different from the number of drives detected by DPM. If any drives are out of the library for servicing, ignore this alert; otherwise, remap the drives within the library manually.

For information about remapping tape library drives, see Remap a tape drive. You may be able to recover data from this tape. This tape is decommissioned and should be removed from the library. If recovery from this tape fails, check for a duplicate or older copy of the data. You must add tape to the library and mark it as free in order to prevent future backups from failing. Although no data is lost, you must rebuild the catalog to access the data of the backup job.

Do you want to set ownership? This will result in: 1. To retry, in the Recovery task area, copy the data to tape by using the Recovery Wizard. To retry, in the Recovery task area, in the Actions pane, select Verify data. Rerunning this job will back up this data source to a new tape.

If you want all data sources in this protection group to be backed up to the same tape, select the Alerts tab, select one of the backups to tape failure alerts for this protection group, and then in the Details section of this alert, select Rerun backup to tape job.

Do you want to back up this data source to a new tape? Inactivating these alerts will also change protection status to OK in the Protection task area and the alerts will be resolved in Operations Manager.

Do you want to inactivate the selected alerts? The job cannot be rerun because a dependent job is still running for a data source that is a part of this Windows SharePoint Services data source.

An incompatible version of the database was detected. Restore a valid database, and then retry the operation. You must purchase a DPM license. Either this group has been deleted or the entry is corrupt. To continue using DPM, you must install any service packs or hotfixes that were part of your previous DPM installation.

NET is not installed. You installed DPM protection agents on several computers. We recommend that you uninstall them before proceeding. On the Agents tab, select the agents, and then select Uninstall. DPM cannot be installed on an existing database. If you need to reuse an older DPM database, back up the database and restore it after completing the DPM installation.

Microsoft office standard 2013 has encountered an error during setup free

If you have a problem you can go to control panel and instead of uninstalling office right click on it and then click on change. You will be given two choices, quick repair and online repair. The online repair reinstalls Office but retains your settings etc.

If that does not work see if they can assist you at Answer Desk technical help. Was this reply helpful? Yes No. Sorry this didn\’t help. PS: also have a look at: Office – Installation error, bootstrapper has stopped working.

Don\’t forget to export AppCompatFlags key to your desktop so that you have a backup if anything goes wrong. Threats include any threat of suicide, violence, or harm to another. Any content of an adult theme or inappropriate to a community web site. Any image, link, or discussion of nudity. Any behavior that is insulting, rude, vulgar, desecrating, or showing disrespect. The Problem is when i click the setup, setup is running well at the first time.

But when the installation almost finish, appear notification \”microsoft office professional plus encountered an error during setup\” then i click close and appear notification again \” microsoft setup bootstrapper has stopped working\”. Now i already installed office , i want install office , Thanks, Isuru. This thread is locked. You can follow the question or vote as helpful, but you cannot reply to this thread. Threats include any threat of suicide, violence, or harm to another.

Any content of an adult theme or inappropriate to a community web site. Any image, link, or discussion of nudity. Any behavior that is insulting, rude, vulgar, desecrating, or showing disrespect.

Any behavior that appears to violate End user license agreements, including providing product keys or links to pirated software. Unsolicited bulk mail or bulk advertising. Any link to or advocacy of virus, spyware, malware, or phishing sites. Any other inappropriate content or behavior as defined by the Terms of Use or Code of Conduct.

Any image, link, or discussion related to child pornography, child nudity, or other child abuse or exploitation. As per description you are unable to install Office Professional on the computer.

Let me help you with the issue. Today in History: Robert E. Lee\’s home area Arlington, Virginia becomes a military cemeteryArlington Estate was established by George Washington\’s adopted grandson, George Washington Parke Custis, to be a living memorial to the first president.

I manage several M tenants all with Security Defaults enabled and in one specific tenant, for some reason, no users including Global Admins are able to create a Team directly in the Teams app using the \”Join or create a team\” option. This option IS Online Events. Log in Join. Possible to specify which calendar Outlook Meetings post too? IPX Dave. OP d3vlabs. I have tried all of the recommendations I can find from Microsoft and anyone else, which include: 1 uninstalling all old versions of office 2 used fixit tool KB removes versions before 3 used fixit tool KB removes 4 clean boot 5 disabling anti-virus Kaspersky KES ver 10 6 regedit to remove AppCompatFlags 7 check services enabled – Task Scheduler, Office Software Protection Platform, RPC 8 regedit disable then re-enable Task Scheduler Is there anything in the logs that will steer me to what the problem is with installation that is causing boostrapper to fail?

TIA, flag Report. Anyone know of any progress in this area? New contributor pimiento. Hello, My problem was just like yours, I have made some research and found out the solution. Join our community to discuss the latest topics about Trend Micro products. Ideas Exchange. Voice your ideas, share your thoughts and be proud. Contact by Sales. Automation Center. Trend Forum. TrendConnect Mobile App. Download Center. Product Documentation.

Support Policies.